Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser will protect your car from key-long theft as well as relay theft. With a personalised PIN sequence, unless they know the code your car won't start!
Transport Mode allows you to temporarily disable the device, which is ideal for vehicle transportation and servicing. The device is then activated by entering a different PIN code.
No Key Fobs or Indicators with Leds
The Ghost 2 immobiliser offers a effective defense against modern theft methods. Its invisibility and engine start blockage reduces the risk of theft, offering peace of mind while saving money on insurance.
It isn't detectable by scanners and is not hacked using common methods like key cloning or signal jamming. The device makes use of buttons in your vehicle such as those on the steering wheel, door panels, and the center console to generate an unique, customizable PIN code sequence that can be up to 20 presses in length. If the correct sequence is entered, or in the event that the beacon or mobile app is employed, only the vehicle owner is able to start the engine, providing an additional layer of security against thieves.
You can also activate the service mode to help in situations such as valet parking or maintenance that require you to temporarily disable the system. The mobile app makes it easy to do this, while ensuring that your vehicle is safe when it is being serviced. ghost immobiliser for sale is easy to revert to secure mode after the job is complete to ensure your vehicle is fully protected throughout the day.
Unlike other aftermarket immobilisers that use a fob, the Ghost 2 can be operated directly from the vehicle's existing buttons, making it far simpler to use than traditional systems. The application can also be used as a backup key in emergency situations. This lets you drive with your security turned off, without having to enter a PIN number.
No Radio Frequency Signals
In contrast to traditional security systems that have their own separate remote, the Ghost 2 immobiliser doesn't require any additional key fobs and can be operated using the buttons on your steering wheel or the centre console. It is also unnoticeable by thieves who use RF scanning or code grabbing technology, which means your car won't even start for it even if they get your keys.
The device makes use of an exclusive 'password' sequence of buttons that locks the engine. This unique PIN code can be entered on the app or via the buttons on the steering wheel and on the centre console. This allows you to lock the gear-box too, meaning your car cannot be driven away until you have a key or are able to enter your pin code. The device can be set to Transport mode, which allows you to drive your vehicle without entering the pin code, and also providing your vehicle with additional security when it's left to valet or service parking.
The Ghost 2 immobiliser was designed to be as discrete as possible, making it a great theft deterrent. This makes it an ideal choice for those who have spent a lot on customising their cars or own expensive or unique vehicles. Many have stated that this device is a great way to prevent their cars from being stolen. Some have even shared stories of attempted thefts of cars that were foiled by it. The Ghost 2 also offers a large amount of flexibility, with customers reporting that it can be used with regular keys for their cars and also with the emergency button on their vehicle, giving them peace of mind when they are away from their vehicle.
No Radio Frequency Scanners
Ghost immobilisers protect your vehicle against key cloning and theft. The system uses the buttons inside your vehicle, such as the ones on the dashboard and your steering wheel, to create a unique, programmable sequence of buttons that only you know. Without this sequence, your car will not start. The combination of a distinct disarm sequence and the absence of radio frequency signals makes the device difficult to hack or bypass.
Contrary to the Thatcham-approved devices that rely on radio frequency scanning The Ghost CAN Immobiliser works silently and without any external signals to perform its magic. It's a much more secure alternative and offers insurance-approved status when it's installed by a TASSA approved installer (we're one of them! ).
Because of and way in which the Ghost immobiliser is integrated into your vehicle, it is recommended to have an expert installer complete its installation. This ensures that it is seamlessly integrated into your vehicle systems, resulting in optimal performance and a considerably reduced risk of failure.
Furthermore, professional installation usually comes with warranties and service that further increase the value of your investment. This is a major security feature that deters thieves who are less likely to make any attempt to evade the device because of its extensive security features and professional installation.
As well as ghost immobiliser for sale to thieves As well as a great deterrent to thieves, as well as a great deterrent to thieves, the Ghost is designed to be user-friendly too. It can be set to automatically rearm for a set amount of time after you have parked your vehicle. This means that you don't have to remember your PIN code every time. It also allows the flexibility of Service/Valet Mode in the event that you have to hand your vehicle over to service or valet parking. It can be disabled or enabled according to your preferences using an easy indication sequence.
No Wire Cutting
The Ghost 2 is non-invasive and does not require any cutting of wires during installation. It connects to your vehicle's CAN data networks, and is programmed with an unique PIN code. This blocks anyone else from starting the engine if they don't have a personalised sequence of PINs or an app authorization.
It is also unnoticeable by the specialised scanning tools that some thieves employ and is silent as it doesn't emit radio signals like other immobilisers. It is weatherproof, sealed and small enough to be concealed in the vehicle.
The Ghost II also has the possibility of being put into 'transport mode,' which allows it to be used for short durations of time without the need for a separate PIN. This is ideal in situations like loaning the car to a friend or family member or in emergencies that allow you to start your vehicle and drive away quickly and safely.
When installing the Ghost II, it's important to work in a well-lit area and wear protective gear when working with electrical and tool components. A basic set of tools can help you make precise connections. A multimeter will allow you to check electrical values and make sure that your wiring is secure. Cable tie and insulation tape can be used to protect any wires that are cut or exposed or to join them during the installation.
It is essential to disconnect the vehicle's battery prior to beginning any wiring work. This will stop any airbag deployments and electrical shocks if the Ghost II is connected to the vehicle's system when the battery is disconnected.
Easy to Install
The Ghost immobiliser is an exclusive next generation device that works by connecting directly to the vehicle's CAN Data Network and using an individual PIN Code to stop your vehicle from getting started. This makes it much harder to hack than conventional key fobs and alarm systems and offers greater protection against key cloning hacking and relay attacks.
The device can be concealed within your vehicle and utilises the buttons already on your dashboard and steering wheel to create the sequence you are aware of. This prevents thieves using a stolen car key to open it and also stops them from using an instrument for diagnosing that thrives on hacking OBD.
Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus using a constant 12V supply identified and a grounding connector. A multimeter is required to identify the right wires. Basic hand tools can be used for the installation. To safeguard the connections from damage, insulation tape or heat shrink tubes are recommended. Cable ties can be used to keep the wiring neat.
After installation, the unit goes into a learning mode and records your unique sequences of buttons and sequences to generate your unique pin code. This information is later stored in the CAN data network, making it virtually impossible for anyone else to duplicate your sequence and start your vehicle.
Transport Mode is a function that can be used in an emergency if you forget your PIN code, sell your vehicle or the button stops working. This will shut down the Ghost System completely, however it will reactivate itself automatically when you exceed 31mph for more than 15 minutes or enter your PIN Code. This is ideal for people who rent out their vehicles on services such as Turo or ZipCar.